The Process Of Disassembling, Reassembling, And To Reset An Empty Beer Keg Equipment
Every equipment needs to be clean every now and then. If you don’t bother about cleaning the equipment, you may find a deteriorated result after some time. When we talk about beer keg equipment in Canada , Pacific Beer Equipment is one of the largest distributors. Our product DFC 9500 immediately stops the flow of the beer at the tap and the keg when the keg goes empty. If you are using the product, you are required to clean it regularly in order to pour the beer without foam. You can use the brush or the solutions suggested by the manufacturer for its cleaning. The Process Of Disassembling Of Beer Keg Equipment Our product DFC 9500 is engineered to be disassembled by hand and initial loosening with an adjustable wrench or channel-lock may be necessary for the first time. Here are the easy steps: Loosen and remove top cap above the float chamber. Remove the “O” ring under the vent plate cap. Unscrew the float chamber glass by turning counter-clockwise. The float leaves of...